EST · MMXXVI
Home/Insights/Regulatory/Foreign Stablecoin Issuer Access to the United States: The Comparability Test
Banking, Payments & EMI Onboarding

Foreign Stablecoin Issuer Access to the United States: The Comparability Test

Foreign Stablecoin Issuer Access to the United States: The Comparability Test. Independent digital-asset law for exchanges, issuers and funds. Cross-border scop

A European stablecoin issuer regulated under MiCA looks across the Atlantic and sees the largest pool of dollar liquidity in the world. The legal question is not whether a non-US issuer can access the United States market – the answer, under emerging federal frameworks, is a conditional yes – but how the comparability assessment works in practice, what registration duties follow and where the banking, custody and compliance stack sits between the home regime and the US perimeter. For an issuer already authorised in the EU, the UAE or a major Asian hub, the analysis starts with whether the home framework is deemed comparable to the US standard, then moves to reciprocity conditions, notice filing and the state-by-state money-transmitter overlay that federal comparability does not displace.

The United States does not operate a single stablecoin authorisation regime. Federal legislation under discussion in 2025 contemplates a primary federal framework for payment stablecoins with a carve-out for foreign issuers whose home regime meets a comparability test. That test evaluates reserve adequacy, redeemability, audit transparency and AML posture; it is not automatic recognition. A foreign issuer meeting the standard still registers with the relevant federal authority, adheres to Travel Rule and sanctions-screening expectations and, in most cases, obtains state money-transmitter licences or relies on a federal pre-emption safe harbour where one exists. The cross-border reality is that an issuer sits in one legal structure – often a single-purpose vehicle in an offshore or EU domicile – while its users, distribution partners and fiat rails span jurisdictions with differing capital, custody and consumer-protection rules.

This analysis walks through the comparability framework as it stands in proposed federal stablecoin legislation, contrasts it with the parallel state licensing regime, explains the practical sequencing for a foreign issuer and addresses the common assumption that a strong home licence guarantees US access. It draws on our work advising payment-token issuers and exchanges on cross-border licensing stacks and on the disputes that follow when a launch proceeds without the right registration. Three decision branches frame the analysis: the issuer already regulated in a comparable jurisdiction, the issuer in a non-comparable jurisdiction seeking direct US authorisation and the issuer using a US-chartered partner as a distribution layer. The page closes with a self-assessment checklist and a decision matrix by issuer profile.

The federal comparability framework: what makes a regime equivalent

The proposed federal stablecoin framework – debated in Congress through 2024 and into 2025 – distinguishes between domestically issued payment stablecoins, which require federal authorisation, and foreign-issued stablecoins that may qualify for a comparability pathway. The core principle is that a foreign issuer regulated under a framework deemed comparable to the US standard may access the US market under a lighter registration regime, provided the home regulator maintains equivalent reserve, audit and consumer-protection standards. Comparability is not self-declared; it is assessed by the US Treasury or the designated federal regulator on the basis of criteria set out in the statute.

The criteria cluster around four pillars. First, reserve adequacy: the home regime must require reserves backing the stablecoin at a one-to-one or better ratio, held in high-quality liquid assets and segregated from the issuer's operational funds. Under MiCA, for example, asset-referenced tokens (ARTs) and e-money tokens (EMTs) face reserve rules calibrated to the token's structure; EMTs enjoy a more permissive framework aligned with the E-Money Directive. Second, redeemability: the token must carry an unconditional redemption right at par; conditional or delayed redemption undermines the comparability case. Third, transparency and audit: the regime must mandate periodic attestation or audit of reserves by an independent third party, disclosed publicly or to the regulator. Fourth, AML and sanctions compliance: the home regime must align with FATF standards, including the Travel Rule for originator and beneficiary data on transfers.

In our cross-border licensing practice, the comparability assessment is not a box-tick. A foreign issuer in a jurisdiction with strong reserve rules but weak enforcement may fail the test, while an issuer in a smaller jurisdiction with a credible regulator and transparent attestation may succeed. The assessment is also bilateral: the US framework includes a reciprocity condition, meaning the foreign jurisdiction must offer equivalent access to US issuers. That reciprocity clause can create a standoff where neither side moves first, though in practice the largest hubs – the EU under MiCA, the UK once its framework hardens, Singapore and the UAE – are expected to clear the threshold.

The practical effect of comparability is that the foreign issuer registers with the federal authority but does not undergo the full domestic authorisation process. Registration duties include disclosure of the home licence, submission of reserve attestation and audit reports, designation of a US agent for service and adherence to US AML obligations including Travel Rule and OFAC screening. The issuer does not capitalise a separate US entity solely for the stablecoin activity, though it may need to establish a US presence for banking, custody or distribution purposes. The comparability pathway compresses the timeline and reduces the duplicated compliance overhead, but it does not eliminate US regulatory exposure.

State money-transmitter licensing: the layer federal comparability does not displace

Federal comparability addresses the substantive authorisation for issuing a payment stablecoin. It does not, under the proposed frameworks seen through mid-2025, automatically pre-empt state money-transmitter licensing. Most US states treat the issuance and redemption of a stablecoin as money transmission: the issuer receives fiat, issues a digital claim and later redeems that claim for fiat. That activity falls within the statutory definition of money transmission in the majority of states, triggering a licensing or registration requirement even where the issuer operates under a federal comparability registration.

The state-by-state patchwork is familiar to payments firms. A foreign stablecoin issuer accessing the US market under federal comparability will, absent explicit federal pre-emption, need to obtain money-transmitter licences in each state where it has users or where it conducts redemption activity. The capital and surety-bond requirements vary by state; the application timelines range from a matter of weeks in states with streamlined processes to several months in states with manual vetting. The cumulative cost and timeline of a 50-state licensing programme can dwarf the federal registration itself.

Two routes reduce the state-layer burden. First, federal pre-emption: the proposed stablecoin legislation includes a provision that, once the federal regime is operational, a federally registered issuer is pre-empted from duplicative state licensing for the stablecoin activity itself. That pre-emption is not yet law; until it takes effect, the default is that state licences remain required. Second, a distribution-partner model: the foreign issuer partners with a US-chartered bank or a federally registered money transmitter that holds the state licences and acts as the US distribution and redemption layer. The foreign issuer remains the token issuer and reserve holder; the US partner handles the fiat interface and carries the state-licensing burden. That model shifts the relationship from issuer–user to issuer–partner–user and introduces contractual, indemnity and control-rights questions, but it accelerates US entry and confines regulatory interaction to the federal and the partner's existing state licences.

In a recent structuring matter, a MiCA-authorised EMT issuer planning a US launch mapped the following sequence: federal comparability registration (timeline estimated at several months post-enactment, though still a placeholder until the final rule is published), parallel state money-transmitter applications in the top-ten-by-volume states to establish initial reach and a partnership agreement with a US bank for fiat on- and off-ramps in states not yet licensed. The issuer's legal spend on US entry exceeded the cost of the original MiCA authorisation, illustrating that comparability is not automatic access but a faster track within a still-complex federal–state matrix.

Reserve and custody requirements: where the assets sit and who holds the keys

The substance of the comparability test turns heavily on where and how the reserve assets backing the stablecoin are held. The proposed federal framework requires that reserves be segregated, held in high-quality liquid assets and subject to independent audit. For a foreign issuer, that raises an immediate question: must the reserves be held in the United States, or may they remain in the home jurisdiction provided they meet the liquidity and segregation standard? The draft legislation seen through 2025 does not mandate on-shore custody of reserves for a foreign issuer under the comparability pathway, but it requires that the reserve structure be transparent and that the issuer maintain the capacity to redeem US users at par without delay.

The practical implication is that a foreign issuer holding reserves in a home-country bank or custodian must demonstrate that those reserves are liquid, accessible for redemption in US dollars and protected in the event of the issuer's insolvency. Where the home regime – MiCA, for example – already mandates segregated reserves and client-asset protection, the foreign issuer's existing structure often satisfies the US standard. The friction arises where the home reserve rules allow commingling, rehypothecation or investment in assets that would not qualify as high-quality liquid under the US definition. In those cases, the issuer restructures the reserve custody to meet the stricter standard or establishes a parallel US-side reserve pool for US users, at the cost of duplicated liquidity and operational complexity.

Custody of the digital asset itself – the stablecoin on the relevant blockchain – is a separate layer. For a blockchain-native token, custody is largely a question of key management and multi-signature controls, not a regulated custodian in the traditional sense. But where the issuer offers institutional custody services alongside the stablecoin or where users hold tokens in a platform wallet controlled by the issuer or its distribution partner, US custody regulation applies. A foreign issuer accessing the US market under comparability does not automatically gain a US custody licence; if it operates a custodial wallet for US users, it needs the relevant state or federal custody authorisation or must use a licensed US custodian as the wallet provider. That custody layer often sits with the distribution partner in the partner model described above.

The MiCA issuer case study: sequencing US entry from an EU base

A stablecoin issuer authorised in the European Union under MiCA begins with a structural advantage in the US comparability assessment. MiCA's EMT and ART regimes are designed to align with international standards; they mandate one-to-one backing for EMTs, segregated reserves and regular audit. The issuer passports across the EU and EEA, giving it a large home market and a proven track record of regulatory compliance. The question is not whether the MiCA regime is comparable – early indications from US regulators suggest it will meet the threshold – but how the issuer sequences its US entry and where it encounters friction.

The sequencing typically follows this path. First, the issuer secures MiCA authorisation in a member state with a credible supervisor and a developed crypto-banking market; Lithuania and Malta have historically been entry points, though the larger financial centres increasingly compete. Second, the issuer establishes distribution partnerships and builds user traction in the EU. Third, once the federal US comparability framework is operational, the issuer files for federal registration, submitting its MiCA licence, reserve attestations and AML programme documentation. The federal registration, once granted, confers the right to market and distribute the stablecoin to US users.

The friction points are state licensing, fiat banking and custody. On state licensing, the issuer faces the choice described earlier: proceed with 50-state money-transmitter applications (timeline: 12 to 18 months for full coverage) or partner with a US entity holding those licences. On banking, the issuer needs a US dollar account to facilitate redemption; European banks with US correspondent relationships can provide that, but the account is typically held by the issuer's US entity or partner, not the home EU entity, to manage sanctions and AML risk. On custody, if the issuer offers a hosted wallet, it either registers as a custodian in relevant US states or uses a licensed partner for US users.

In a matter handled in late 2024, a MiCA EMT issuer targeting the US market elected to establish a Delaware LLC as its US operating entity, file for federal registration once the framework took effect and simultaneously apply for money-transmitter licences in New York, California, Texas and Florida – the four largest markets. The LLC contracted with a US bank holding a federal charter for fiat custody and redemption, eliminating the need for separate banking relationships in each state. The issuer's timeline from EU authorisation to first US user was approximately nine months, of which six months were occupied by state licensing and banking onboarding. The legal and compliance cost for US entry was roughly double the MiCA authorisation cost, illustrating that comparability reduces but does not eliminate the US regulatory lift.

The UAE and Asian issuer scenarios: where comparability is uncertain

An issuer authorised under the Dubai VARA regime or the Abu Dhabi ADGM framework occupies a different position. The UAE regimes are comprehensive and well-regarded within the industry, but they are newer than MiCA and lack the multilateral treaty structure that underpins EU–US regulatory cooperation. The US comparability assessment will evaluate the substantive standards – reserve rules, audit, AML – but also the supervisory track record and the reciprocity condition. As of mid-2025, it remains an open question whether VARA or ADGM clears the federal comparability threshold in the first tranche of approved jurisdictions.

Where the home regime is not deemed comparable, the foreign issuer faces a choice: seek direct US federal authorisation as a domestic issuer (requiring a US entity, US capitalisation and full compliance with the domestic standard) or defer US market entry until comparability is granted. Direct authorisation is the costlier path but may be necessary for issuers whose business model depends on immediate US access. The UAE issuer scenario illustrates the decision: a VARA-licensed stablecoin issuer planning a US launch in 2025 proceeded with a dual-track approach – filing for federal comparability registration on the assumption that VARA would be recognised and, in parallel, establishing a US entity and preparing a full domestic application as a fallback. The dual track doubled the initial legal spend but protected against a comparability denial that would have halted the launch.

Asian issuers face a similar calculus. Singapore's MAS regime for digital payment tokens is mature and aligned with FATF standards, making it a strong candidate for US comparability. Hong Kong's VASP framework is newer but credible. Japan's FSA and JVCEA self-regulatory model is well-established. Smaller Asian jurisdictions with lighter regimes are less likely to clear the threshold. The practical reality is that an Asian issuer targeting the US market must evaluate the comparability likelihood early in the licensing phase; where the home jurisdiction is uncertain, the issuer considers a supplementary EU authorisation under MiCA to gain comparability access via the EU–US pathway, effectively treating MiCA as a bridge licence.

Registration duties under comparability: what the foreign issuer files and when

A foreign issuer qualifying for the comparability pathway does not undergo a de novo authorisation in the United States, but it is not exempt from US regulatory duties. The federal registration process, as outlined in proposed legislation, requires the issuer to file certain core disclosures and maintain ongoing reporting obligations. The initial registration filing typically includes: evidence of the home-jurisdiction authorisation and the legal basis on which it was granted; a description of the stablecoin, including the reserve structure, the redemption mechanism and the blockchain or ledger on which it operates; the most recent reserve attestation or audit report; the issuer's AML and sanctions-compliance programme; and the designation of a US agent for service of process.

Once registered, the issuer adheres to ongoing duties. These include periodic reporting of reserve composition and attestation (often quarterly), notification of material changes to the stablecoin's terms or reserve structure, and adherence to US AML obligations including the Travel Rule for transfers above a specified threshold. The issuer is subject to examination by the federal regulator, though the frequency and intensity are typically lighter than for a domestically authorised issuer. The comparability registration does not insulate the issuer from enforcement; where the issuer breaches reserve, redemption or AML obligations, the federal regulator may suspend or revoke the registration, triggering a wind-down or a shift to the full domestic authorisation pathway.

The designation of a US agent is a practical requirement. The agent is a US person or entity authorised to receive service of legal process on behalf of the foreign issuer and to act as the primary point of contact with the regulator. Many foreign issuers designate their US counsel or a corporate-services provider as the agent. The agent must maintain a US address and be available during US business hours. The agent is not a guarantor or a principal; it is purely a procedural mechanism, but its designation is a condition of registration.

The distribution-partner model: when a US intermediary carries the state-licensing burden

The distribution-partner model is the most common route for a foreign stablecoin issuer entering the United States before full federal pre-emption of state money-transmitter licensing takes effect. Under this model, the foreign issuer remains the legal issuer of the token and the holder of the reserves, but it contracts with a US-based partner – typically a federally chartered bank or a money transmitter holding licences in all or most states – to act as the distribution and redemption layer for US users. The partner onboards US users, facilitates fiat-to-token and token-to-fiat conversion and handles the US regulatory interface including state licensing, AML reporting and sanctions screening.

The division of duties is set out in a distribution agreement. The foreign issuer is responsible for reserve custody, the blockchain layer, the redemption obligation to the partner and ongoing compliance with the federal comparability registration. The US partner is responsible for user onboarding, KYC/AML at the user level, state money-transmitter compliance and fiat banking. The partner typically earns a fee per transaction or a revenue share; it does not take title to the underlying reserves, which remain segregated in the foreign issuer's custody. From a user perspective, the transaction appears seamless: the user interacts with the partner's platform, but the token is issued by the foreign entity.

The model shifts legal and operational risk. The foreign issuer retains the primary liability for reserve adequacy and redemption at par; if the reserves are impaired, the partner and the US users have a claim on the issuer. The partner carries the state-licensing and US-banking risk; if the partner loses a state licence or its banking relationship, the foreign issuer's US distribution in that state is interrupted. The model also introduces credit risk: the partner holds user fiat in its own accounts pending conversion, and in the event of the partner's insolvency, those funds may be at risk unless segregated under a trust or custodial structure. We have seen distribution agreements falter where this credit risk is not addressed in the contract.

In a structuring matter concluded in early 2025, a foreign stablecoin issuer partnered with a US federally chartered bank to launch in the United States. The bank held money-transmitter licences in 48 states and a federal charter that pre-empted certain state requirements. The issuer remained offshore; the bank onboarded users through its existing platform and routed issuance and redemption instructions to the issuer's API. The issuer paid the bank a fixed fee per million tokens issued and redeemed. The structure collapsed the US entry timeline from over a year to under four months, but the issuer accepted that the bank's termination right – exercisable on 90 days' notice – created an exit risk that would force a transition to a new partner or direct state licensing.

Banking and fiat rails: where the dollars move and who holds the accounts

The mechanics of reserve custody and redemption turn on banking. A foreign stablecoin issuer accessing the US market must hold or have access to a US dollar account to facilitate redemption for US users. That account is the fiat side of the stablecoin's reserve structure; when a user redeems tokens, the issuer transfers dollars from that account to the user's bank or to the distribution partner, who forwards them to the user. The account is not a trading or operating account; it is a reserve or custodial account holding only the funds backing issued tokens.

For a foreign issuer, obtaining a US dollar banking relationship is often the longest lead-item in the launch sequence. US banks are cautious about onboarding foreign stablecoin issuers, even those with strong home-jurisdiction licences. The banks' concerns cluster around AML risk, sanctions exposure and the reputational risk of association with a sector that, until recently, operated largely outside traditional regulatory perimeters. The issuer's application to a US bank for a reserve account resembles a full banking onboarding: beneficial ownership disclosure, source of funds, business plan, compliance-programme documentation and often a legal opinion on the issuer's regulatory status.

The most direct route is a US bank account in the issuer's name or in the name of its US entity. That account gives the issuer full control over redemption and eliminates intermediary credit risk, but it requires the issuer to meet the bank's onboarding standard. Where the issuer cannot clear that standard – common for newer issuers or those in jurisdictions the bank perceives as higher-risk – the alternative is an account held by the US distribution partner. The partner's account receives the user's fiat on purchase and disburses fiat on redemption; the foreign issuer's reserves remain in its home-country account, and the partner reconciles daily with the issuer. That structure introduces the credit and settlement risk described above and requires tight contractual controls on the partner's use of the account.

A third model is a correspondent banking arrangement: the foreign issuer holds a US dollar account with a non-US bank that has a correspondent relationship with a US bank. The correspondent bank processes US dollar wires on behalf of the foreign bank. This model works for redemption but not for direct user onboarding; US users generally require a domestic ACH or wire destination, not a foreign correspondent route. Correspondent banking is a fallback for issuers who cannot obtain direct US banking and are not yet ready to commit to a full distribution partner.

AML, Travel Rule and sanctions screening: the compliance overlay for cross-border flows

A foreign stablecoin issuer accessing the US market operates under dual AML obligations: the home jurisdiction's framework (under MiCA, VARA, MAS or another regime) and the US framework (FinCEN, OFAC and state-level AML duties where applicable). The federal comparability pathway does not exempt the issuer from US AML; it assumes the home regime is equivalent, but it imposes parallel US filing and screening requirements. The issuer must register with FinCEN as a money services business (MSB) if it meets the statutory definition, file suspicious-activity reports (SARs) for transactions involving US persons and adhere to OFAC sanctions screening for all transactions touching the United States.

The Travel Rule is the sharpest compliance edge. Under the FATF standard, adopted in the United States by FinCEN, a virtual-asset service provider must transmit originator and beneficiary information with any transfer above a specified threshold. For a stablecoin issuer, the Travel Rule applies to on-chain transfers where the issuer acts as the intermediary or custodian of the user's wallet. Many stablecoins operate on a non-custodial model: the user holds the private key, and the issuer has no transaction visibility beyond issuance and redemption. In that case, the issuer's Travel Rule obligation is limited to the issuance and redemption events. Where the issuer or its distribution partner operates a custodial wallet, the Travel Rule applies to peer-to-peer transfers within the platform and to transfers out to external wallets.

Implementation is complex. The issuer must build or integrate a Travel Rule solution that collects originator and beneficiary data, transmits it to the counterparty VASP and stores it for the required retention period. The solution must cover both the home jurisdiction's Travel Rule threshold and the US threshold; where the thresholds differ, the issuer applies the lower threshold to avoid a compliance gap. In our compliance practice, we see issuers struggle with the Travel Rule not because the obligation is unclear but because the technology and the industry-wide messaging protocol are still maturing. A foreign issuer entering the US market typically contracts with a third-party Travel Rule provider or builds API integration with the major Travel Rule networks (such as TRP or Notabene), at a cost of several thousand dollars per month plus integration.

Sanctions screening is continuous. Every issuance, redemption and custodial transfer is screened against OFAC's Specially Designated Nationals (SDN) list and against sector sanctions and country-based restrictions. The issuer screens wallet addresses using on-chain analytics and screens user identity data at onboarding and transaction time. A single missed hit can trigger enforcement. The US sanctions regime extends extraterritorially; even a foreign issuer with no US presence is liable under US sanctions law if it processes transactions for a sanctioned person using US dollars or touching the US financial system. The practical implication is that a foreign issuer accessing the US market treats sanctions compliance as if it were a US entity, regardless of the comparability pathway.

When the issuer does not qualify: the direct US authorisation alternative

Where a foreign stablecoin issuer's home regime is not deemed comparable under the federal framework, the issuer has two options: wait for comparability recognition or seek direct US authorisation as a domestic issuer. Direct authorisation requires the issuer to establish a US entity (typically a Delaware corporation or LLC), capitalise that entity to meet the federal standard, apply for federal authorisation under the domestic pathway and obtain state money-transmitter licences in each state where it will operate. The process is longer and more capital-intensive than the comparability route, but it confers the same legal status as a US-origin issuer and eliminates the dependency on a foreign regulator's ongoing relationship with the US Treasury.

The decision to pursue direct authorisation turns on market access urgency and capital availability. A well-capitalised issuer targeting immediate US launch may elect direct authorisation even if comparability is expected within a year, to avoid the delay. A smaller issuer may defer US entry until comparability is granted or until it secures a distribution partner that handles the US regulatory burden. Direct authorisation also appeals to issuers who intend to establish a long-term US operational presence; the US entity can serve as the hub for North American distribution, product development and institutional partnerships, with the foreign parent as the reserve holder and technology provider.

The capital requirement under direct authorisation is a key barrier. Proposed federal frameworks contemplate a tiered capital structure, with higher requirements for larger issuers or for issuers whose token qualifies as systemically important. The figures remain subject to final rulemaking, so at this stage the issuer budgets qualitatively: capital in the range of what a federally chartered trust company or a large money transmitter would hold. The issuer must also meet the state-level net-worth and surety-bond requirements, which vary by state but are typically lower than the federal requirement. The cumulative capital outlay for federal authorisation plus 50-state licensing can reach into the tens of millions of dollars for a large-scale launch.

Common mistakes and objection handler: why a strong home licence is not automatic US access

A common assumption among foreign stablecoin issuers is that a strong home-jurisdiction licence – particularly a MiCA authorisation or a licence from a major financial centre – guarantees US market access. That assumption is incorrect. Comparability recognition is a bilateral process; it depends not only on the substantive standards of the home regime but also on reciprocity, on the supervisory track record and on the political and diplomatic relationship between the jurisdictions. An issuer authorised in a jurisdiction with excellent reserve and audit rules may fail the comparability test if that jurisdiction does not offer reciprocal access to US issuers, or if the home regulator has a history of enforcement gaps.

The second mistake is underestimating the state-licensing burden. Even where federal comparability is granted, state money-transmitter licensing remains a requirement in most scenarios until federal pre-emption takes full effect. An issuer that launches to US users under federal comparability registration without securing the necessary state licences operates unlawfully at the state level and exposes itself to enforcement, user-fund freezes and civil liability. The state licensing timeline – 12 to 18 months for comprehensive coverage – must be built into the US entry plan from the outset, or the issuer must commit to the distribution-partner model as a bridge.

The third mistake is neglecting the banking lead time. A foreign issuer that obtains federal comparability registration and state licences but lacks a US dollar banking relationship cannot facilitate redemption and cannot launch. Banking is often the longest single lead item, and it is entirely outside the issuer's control; the bank's decision to onboard or decline is discretionary. An issuer that waits until after registration to approach banks often faces a six- to nine-month delay while the bank completes its due diligence. The correct sequencing is to begin banking outreach in parallel with the federal registration filing, so that the account is open and operational when the registration is granted.

Decision matrix by issuer profile: which route to US market access

The optimal route to US market access depends on the issuer's profile: where it is licensed, how quickly it needs US entry, whether it has US banking and how much capital it can deploy. Four profiles illustrate the decision branches.

Profile A: EU-based issuer, MiCA-authorised, strong banking, patient timeline. This issuer waits for federal comparability recognition (expected for MiCA in the first tranche), files for federal registration, secures state money-transmitter licences in top-tier states and launches direct to US users. Timeline: nine to twelve months from comparability framework enactment. Capital requirement: state licensing bonds and modest working capital for the US entity; no full re-capitalisation. Risk: state-licensing delays or banking rejection can push the timeline.

Profile B: UAE-based issuer, VARA-licensed, uncertain comparability, urgent timeline. This issuer pursues the dual-track approach: files for comparability and, in parallel, establishes a US entity and prepares a direct federal authorisation application. If comparability is granted, the issuer proceeds on that path and abandons the domestic application; if comparability is denied, the domestic application is activated. Timeline: 12 to 18 months. Capital requirement: full domestic capitalisation, so significantly higher. Risk: dual legal and compliance spend; potential for wasted cost if one track is abandoned.

Profile C: Asian issuer, MAS-licensed, moderate capital, speed prioritised. This issuer partners with a US distribution entity holding federal and state licences. The issuer remains offshore, avoids direct US licensing and launches within four to six months. Capital requirement: minimal US-side capital; distribution fee to the partner. Risk: dependency on the partner's compliance and operational stability; credit risk on user funds held by the partner; limited control over the US user relationship.

Profile D: startup issuer, no existing licence, high capitalisation. This issuer skips the foreign-licence step and pursues direct US federal authorisation from inception. It establishes the US entity, capitalises it, applies for federal authorisation and state licences and builds its entire compliance and banking stack in the United States. Timeline: 18 to 24 months. Capital requirement: highest of the four profiles. Risk: longest path; exposure to regulatory change during the build; banking and custody partnerships must be secured early.

The matrix is not exhaustive, but it illustrates the logic: comparability shortens the path for issuers already licensed in recognised jurisdictions, the partner model offers speed at the cost of control and direct authorisation is the fallback for issuers without a comparable licence or with a strategic need for full US presence.

Self-assessment checklist: is your structure ready for US market access

A foreign stablecoin issuer evaluating US entry should work through the following questions. Is the home jurisdiction likely to be deemed comparable under the federal framework? (If uncertain, consult early with US regulatory counsel.) Does the issuer hold a valid, current authorisation in that jurisdiction, and is the authorisation specific to stablecoin issuance or a broader payments or e-money licence? Are the reserves backing the stablecoin held in segregated accounts, and do they meet the high-quality liquid-asset standard? Is the reserve structure attested or audited by an independent third party, and are those reports public or available to regulators?

Does the issuer have a US dollar banking relationship, either directly or through a correspondent or partner? If not, has it approached US banks and received indicative feedback on likelihood of onboarding? Does the issuer have a US legal entity, and if so, is that entity adequately capitalised for the state licensing requirements? Has the issuer designated a US agent for service, or identified counsel or a corporate-services provider to act in that capacity?

Does the issuer's AML programme cover FATF Recommendation 15 and the Travel Rule, and is the Travel Rule solution operational? Does the issuer screen transactions against OFAC sanctions lists, and does that screening cover US persons regardless of where the transaction originates? If the issuer offers custodial services, does it have or plan to obtain a US custody licence, or will it use a licensed partner for US users?

Has the issuer mapped the state money-transmitter licensing requirement, identified the states where its users will be concentrated and developed a licensing or partner strategy to cover those states? Has the issuer budgeted the timeline and legal cost for US entry, and does that budget account for banking lead time and potential state-licensing delays? The answers to these questions surface the readiness gaps and the decision whether to proceed with comparability, partner-distribution or direct authorisation.

For a scoped assessment of your stablecoin's US market-access path – including a preliminary comparability analysis, a state-licensing map and a banking-outreach strategy – contact OBOLUS at info@oboluslaw.com. Our licensing team works with issuers across the major hubs to sequence cross-border entry and pressure-test the structure before launch.

FAQ

Can a crypto firm access banking under this regime?

A stablecoin issuer operating under the federal comparability pathway or direct authorisation is a regulated payments entity, which materially improves its banking prospects. US banks remain cautious, but a federal registration and demonstrable compliance with AML and reserve standards position the issuer as a lower-risk client. Many issuers secure banking through a US distribution partner or through a non-US bank with correspondent access, rather than a direct US retail-bank relationship. The banking decision remains discretionary; the licence does not guarantee an account, but it removes a major barrier.

What safeguarding applies to client funds?

Under the federal comparability framework and most state money-transmitter regimes, the stablecoin issuer must hold reserves backing issued tokens in segregated accounts, separate from operational funds. Those reserves must be held in high-quality liquid assets, subject to periodic audit and available to redeem users at par. In the event of the issuer's insolvency, the reserves are protected as client funds and are not available to the issuer's general creditors. The safeguarding standard is comparable to the e-money and client-asset rules in the EU and major Asian hubs, though the specific custody and bankruptcy treatment vary by state.

Which payment licence is required?

A foreign stablecoin issuer accessing the United States requires federal registration under the comparability pathway or full federal authorisation as a domestic issuer, plus state money-transmitter licences in each state where it has users or conducts redemption activity. The federal registration is the primary substantive authorisation; the state licences address the payment-transmission and money-services aspects. Where the issuer partners with a US distribution entity, the partner typically holds the state licences and the issuer relies on the federal registration and its home-jurisdiction authorisation. The licensing requirement is cumulative, not alternative; federal registration does not eliminate the state layer unless federal pre-emption takes effect.

About OBOLUS. OBOLUS is an independent digital-asset law boutique acting only for businesses. We advise exchanges, custodians, token issuers and funds on licensing across 70+ jurisdictions, on disputes and on-chain asset recovery across 25+ forums, and on the tax, banking and compliance that sit around them. Digital assets are the whole of our practice. Our licensing team maps the substance-over-form classification test and sequences cross-border authorisation to minimise duplicated capital and timeline. To discuss your situation, contact info@oboluslaw.com.

By Victor Olsen, Regulatory & Compliance Analyst – specialising in cross-border stablecoin and payment-token licensing, comparability assessments and the federal–state regulatory interface for foreign issuers entering the United States.

This publication is general information about the law and does not constitute legal advice. It is not a substitute for advice tailored to your circumstances. OBOLUS accepts no liability for action taken or not taken on the basis of this material. For advice on your situation, contact info@oboluslaw.com.

Discuss your matter with OBOLUS

Tell us about the business, the jurisdictions in scope and the deadline. Every brief is confidential and we reply within two hours.

Or email info@oboluslaw.com. We treat your brief as confidential.

Tell us the task — we'll map your options in 30 minutes.

Fixed-fee packages with defined scope and SLAs. The first call is free and under NDA. Business clients only.

Map your optionsinfo@oboluslaw.com · reply < 2 hours