A token issuer structuring a dollar-denominated stablecoin for payment use in the United States confronts a regulatory proposition that, until recently, existed only as a patchwork of state money-transmission requirements and federal enforcement theories. With the introduction of federal payment-stablecoin legislation under discussion in Congress – commonly referred to as the GENIUS Act framework – the legal perimeter is crystallizing into a supervisory regime that borrows from both banking law and the Payment Services Act models familiar to operators in other flagship hubs. The statutory text remains subject to amendment, but the architecture it proposes defines who may issue a payment stablecoin, the reserve and redemption obligations that attach, the Bank Secrecy Act (BSA) and anti-money-laundering (AML) requirements that apply, and the insolvency priority afforded to holders. For a business planning to launch a fiat-backed stable token for commercial use, the question turns on whether the structure can meet the permitted-issuer criteria, sustain the reserve composition and segregation duties, and absorb the compliance and capital burden of federal supervision. This guide sets out the sequential steps, the obligations at each stage, and the cross-border interaction with banking and licensing in other jurisdictions where your users or banking relationships sit.
Who is a permitted issuer under the proposed federal framework
The federal payment-stablecoin regime defines a narrow class of entities eligible to issue a payment stablecoin in the United States. Under the proposed framework, a permitted issuer is a depository institution – a federally chartered or state-chartered bank, a savings association, or a credit union – or a nonbank entity that obtains a federal payment-stablecoin issuer licence from the relevant federal regulator, typically the Office of the Comptroller of the Currency (OCC) or, for state-chartered applicants, the Federal Reserve in coordination with the state supervisor. The statutory definition excludes entities operating solely under state money-transmitter licences without the federal issuer designation; a money-transmitter licence that sufficed for custodial or brokerage activity does not confer the authority to issue a payment stablecoin as the term is defined under the Act. The Act's definition of a payment stablecoin turns on its economic substance: a digital asset designed to maintain a stable value relative to a fixed amount of monetary value, redeemable on demand at par by the holder, and issued primarily for payment, settlement or exchange purposes rather than as an investment contract or a speculative instrument.
For a nonbank applicant, the federal issuer licence imposes organizational, capital and governance requirements that mirror bank prudential standards. The applicant must be a corporation or limited-liability company organized under US law, maintain a principal place of business in the United States, and demonstrate that its board and senior management possess the expertise to manage the risks inherent in stablecoin issuance – liquidity risk, redemption risk, operational risk, and the cyber and custodial risks associated with on-chain assets. The regulator evaluates the applicant's business plan, its reserve-management framework, its redemption policies, its technology stack, and its compliance infrastructure for BSA/AML and sanctions screening. The application process is sequential and resource-intensive; an incomplete or under-documented submission will stall, and a second attempt following a withdrawal typically requires a material restructure or governance change to reset the regulator's risk assessment.
In our cross-border practice, we see nonbank applicants grappling with the reality that federal supervision demands both substance and process transparency from day one. A prototype launched under a state money-transmitter licence cannot simply migrate to the federal issuer regime without a corporate reorganization, a board upgrade, and a reserve framework that meets the statutory composition and segregation standards. The issuer classification determines the regulatory pathway, and the pathway determines the capital, the governance, and the banking relationships required to sustain the licence. For a scoped assessment of whether your structure qualifies under the proposed framework, contact OBOLUS at info@oboluslaw.com.
Reserve composition and segregation obligations
A permitted issuer must hold reserves backing the outstanding payment stablecoins on a one-to-one basis, segregated from the issuer's proprietary assets and invested exclusively in high-quality liquid assets specified by the Act. The reserve composition is prescriptive: US dollar deposits in insured depository institutions, short-term US Treasury securities, Treasury repurchase agreements, and central bank reserve balances. The Act prohibits the issuer from lending the reserves, rehypothecating them, or investing them in corporate debt, equity securities, or any instrument with duration or credit risk beyond the narrow permitted classes. The reserves must be held in custody arrangements that ensure legal segregation and operational independence from the issuer's other business lines; a commingled account structure in which the issuer's proprietary funds and the reserves share a single pool fails the segregation test and constitutes a material violation from the regulator's perspective.
The Act imposes a daily reserve reconciliation obligation: the issuer must reconcile the on-chain supply of issued stablecoins with the reserve balances held in custody, and attest to the reconciliation in a monthly public disclosure. The disclosure must state the total supply, the aggregate reserve balance, the composition of the reserves by asset class, and the identity of the custodians holding the reserves. The issuer must engage an independent public accountant to audit the reserve attestation at least quarterly, and file the attestation with the supervising federal regulator within a specified period following the end of each quarter. The accountant's opinion must address whether the reserves are held in compliance with the statutory requirements, whether the legal segregation is effective, and whether the reconciliation process produces an accurate supply-to-reserve match. A qualified opinion or an adverse opinion triggers an immediate supervisory review, and repeated failures to maintain the one-to-one peg or to produce a clean attestation can result in the suspension or revocation of the issuer's licence.
For a cross-border operator, the reserve and segregation framework interacts with the banking jurisdiction where the reserves sit. A US-domiciled issuer holding reserves at a foreign branch of a US bank or at a non-US bank introduces a choice-of-law and enforcement risk that the regulator will scrutinize closely; the Act's holder-priority provisions, which we address below, depend on the custodian's insolvency regime aligning with US law. In practice, this means that an issuer seeking federal approval will hold reserves primarily at US-domiciled, federally insured banks or in direct accounts with the Federal Reserve if the issuer qualifies for master-account access. The capital and operational cost of maintaining multiple custodian relationships at institutions willing to bank a stablecoin issuer is non-trivial, and the periodic attestation and audit fees add a recurring expense that must be modeled into the business case before the issuer commits to a launch timeline.
BSA and AML obligations under the federal regime
A payment-stablecoin issuer is a "financial institution" for purposes of the Bank Secrecy Act and is subject to the BSA/AML obligations enforced by the Financial Crimes Enforcement Network (FinCEN). The issuer must implement a comprehensive AML program that includes customer due diligence (CDD), enhanced due diligence (EDD) for high-risk customers, transaction monitoring, suspicious-activity reporting (SAR), and compliance with the Office of Foreign Assets Control (OFAC) sanctions programs. The issuer's AML program must be tailored to the specific risks of stablecoin issuance and redemption: the issuer must identify and verify the identity of each holder to whom it directly issues or redeems tokens, maintain records of issuance and redemption transactions, and file currency-transaction reports (CTR) for transactions that meet the statutory threshold. Where the issuer issues tokens to an intermediary – a crypto exchange, a payment processor, or a wallet provider – that will in turn distribute the tokens to end users, the issuer must conduct EDD on the intermediary and obtain assurance that the intermediary maintains an AML program that extends CDD and transaction monitoring to the end users.
The Travel Rule applies to stablecoin transfers in the same manner that it applies to other virtual-asset transfers: when a transfer of payment stablecoins exceeds the de-minimis threshold, the originating financial institution must transmit originator and beneficiary information to the beneficiary institution, and both institutions must screen the transaction against sanctions lists and file a SAR if the transaction meets the reporting criteria. For a stablecoin operating on a public blockchain, the technical challenge is to embed the Travel Rule data in a manner that preserves privacy for legitimate users while enabling the issuer and intermediaries to comply with the pass-through obligation. The Act does not prescribe a technical standard for Travel Rule compliance in the stablecoin context, but FinCEN's guidance and the Financial Action Task Force (FATF) Recommendations establish the expectation that the issuer's technology stack must support the collection, transmission, and storage of the required data, and that the issuer will periodically audit its intermediaries' compliance with their own Travel Rule obligations.
Operators we advise routinely underestimate the operational cost of BSA/AML compliance at scale. A stablecoin with material transaction volume requires a dedicated compliance team, a transaction-monitoring platform capable of parsing on-chain data and correlating it with off-chain customer records, and legal and audit support to manage SARs, respond to law-enforcement inquiries, and navigate the periodic examinations conducted by the issuer's functional regulator. A common mistake at this stage is to assume that a compliance vendor's off-the-shelf solution will satisfy the BSA requirements without customization; in practice, the regulator expects the issuer to tailor the monitoring rules to the issuer's specific risk profile, to document the rationale for the rules, and to produce periodic effectiveness reports demonstrating that the program is detecting and escalating suspicious activity. If a prior compliance framework was calibrated for a custody or brokerage business, a wholesale re-build is typically required before the issuer applies for the federal licence.
Redemption mechanics and the par-value obligation
A payment stablecoin must be redeemable by the holder on demand at par – one token for one unit of the fiat currency to which the token is pegged – within a reasonable period following the redemption request. The Act does not specify the maximum redemption timeline in hours, but regulatory guidance indicates that "reasonable" in the context of a payment instrument means within the same business day for requests submitted during business hours, or by the close of the next business day for requests submitted after hours or on a weekend. The issuer may impose a know-your-customer (KYC) verification requirement at the point of redemption to satisfy its BSA obligations, but the verification process must not create an indefinite delay; if the issuer has conducted adequate due diligence at issuance, the redemption should proceed without additional documentation unless the issuer has a reasonable suspicion of fraud, money laundering, or sanctions evasion.
The redemption obligation is unconditional: the issuer may not condition redemption on the holder agreeing to a discount, on the holder holding the token for a minimum period, or on market conditions permitting the liquidation of the reserves at par. The holder's entitlement to redeem at par is a statutory right, and any contractual term purporting to limit or waive that right is void as a matter of law under the Act. The redemption process must be documented in the issuer's published redemption policy, which must state the submission procedures, the verification requirements, the settlement method, and the timeline. The policy must be accessible to all holders, and the issuer must file the policy with its supervising regulator and update it whenever the procedures change. A failure to honor a redemption request within the prescribed timeline without a legitimate compliance reason (such as a pending SAR or an OFAC match) exposes the issuer to enforcement action and reputational damage that can trigger a broader run on the stablecoin.
In a cross-border context, the redemption right raises a practical question: if the holder is a foreign entity or an individual outside the United States, how does the issuer deliver fiat currency to the holder in compliance with both US law and the holder's local banking and capital-control regulations? The Act does not resolve this question explicitly, but the implicit expectation is that the issuer will maintain correspondent relationships or partnerships with payment processors that can settle in the holder's jurisdiction, or that the issuer will issue tokens only to holders who maintain US-domiciled bank accounts capable of receiving domestic wire transfers. For a global stablecoin, the redemption infrastructure must be designed from the outset to handle multi-jurisdictional settlement, and the issuer's reserve and banking arrangements must support the liquidity required to settle redemptions in multiple time zones without exposing the issuer to foreign-exchange or settlement risk.
Holder priority in an issuer insolvency
The Act establishes a statutory priority for payment-stablecoin holders in the event of the issuer's insolvency, bankruptcy, or receivership. The reserves held to back the outstanding stablecoins are deemed to be held in trust for the benefit of the holders and are not property of the issuer's estate available to satisfy the claims of general unsecured creditors. In a liquidation or receivership, the trustee or receiver must segregate the reserves and distribute them to the holders on a pro-rata basis to the extent the reserves are sufficient to redeem the outstanding tokens at par; only after the holders are made whole may any surplus reserves be returned to the issuer's estate for distribution to other creditors. This holder-priority rule is a departure from the default priority scheme under the Bankruptcy Code, which generally treats customer property held by a money transmitter or a payment processor as part of the estate unless a specific statute or a perfected security interest grants the customer a superior claim.
The effectiveness of the holder-priority protection depends on the legal segregation of the reserves being maintained at all times and being enforceable against the custodian banks where the reserves are held. If the reserves are commingled with the issuer's proprietary assets, or if the custodian has a right of setoff or a security interest in the account that could allow the custodian to satisfy the issuer's debts to the custodian from the reserves, the statutory trust may be defeated, and the holders' claims may be subordinated to the custodian's claims. The Act requires the issuer to structure its custody agreements to eliminate setoff rights and to obtain the custodian's acknowledgment that the reserves are held in trust for the holders, not as the issuer's property. In practice, this means that the issuer must negotiate bespoke custody documentation with each custodian, and the documentation must be reviewed and approved by the issuer's supervising regulator as part of the licence application or the periodic examination process.
For holders assessing the credit risk of a stablecoin issuer, the holder-priority rule provides a meaningful safeguard, but it is not a guarantee of full recovery. If the reserves fall below the one-to-one peg due to a reserve-asset default, a custody failure, or an operational error, the shortfall is borne by the holders on a pro-rata basis; the issuer has no obligation to make the holders whole from its own capital, and the Act does not establish a deposit-insurance scheme for stablecoin holders comparable to FDIC insurance for bank depositors. The holders' recourse is limited to their claims in the issuer's insolvency proceeding and any claims they may have against the directors and officers if the shortfall resulted from a breach of fiduciary duty. This risk profile distinguishes a payment stablecoin from a bank deposit and underscores the importance of ongoing reserve attestation and regulatory supervision as the primary mechanisms for ensuring that the peg holds.
The supervisory route and examination framework
A federally licensed payment-stablecoin issuer is subject to ongoing supervision by the OCC, the Federal Reserve, or the relevant state banking regulator acting in coordination with a federal functional regulator, depending on the issuer's charter type. The supervisory framework mirrors the examination regime applied to depository institutions and includes periodic safety-and-soundness examinations, AML/BSA compliance examinations, and targeted reviews of the issuer's reserve-management and redemption processes. The regulator conducts on-site examinations at intervals that vary with the issuer's risk profile; a newly licensed issuer or an issuer that has experienced a compliance failure may be examined quarterly, while a mature issuer with a clean record may be examined annually. The examination scope includes a review of the issuer's capital adequacy, its liquidity position, its board governance and risk-management frameworks, its technology and cybersecurity controls, and its AML program effectiveness.
The regulator has the authority to impose conditions on the issuer's licence, to require the issuer to submit remediation plans if deficiencies are identified, and to suspend or revoke the licence if the issuer fails to cure material violations within the prescribed period. The issuer must maintain capital levels that satisfy the regulator's risk-based capital requirements, which are calibrated to the issuer's asset size, the volume and velocity of issuance and redemption transactions, and the concentration of the issuer's custodian and reserve-asset exposures. The capital requirement is not a fixed dollar threshold but a formula that applies minimum ratios to the issuer's risk-weighted assets and operational-risk exposures; as the issuer scales, the capital requirement scales proportionally, and the issuer must either retain earnings or raise equity to maintain compliance.
For a business weighing the federal issuer route against alternative structures, the supervisory burden is the central trade-off. A federally supervised issuer gains regulatory clarity, access to federal banking infrastructure (including potential eligibility for a Federal Reserve master account), and a framework that preempts conflicting state-level regimes and provides a legal foundation for interstate and cross-border issuance. The cost is the ongoing supervision, the capital and liquidity requirements, and the operational discipline required to pass periodic examinations. The issuer must maintain a compliance and risk function staffed at a level that would be typical for a midsized bank, and the senior management team must be prepared to engage with examiners, respond to regulatory inquiries, and document policy and procedure changes in real time. If a prior stablecoin prototype stalled on banking or compliance issues, a second approach with the federal framework mapped from the outset can surface the structural route back. To discuss your situation, write to info@oboluslaw.com.
Common mistakes in the application and operational phases
Operators routinely make predictable mistakes when structuring for federal stablecoin-issuer compliance, and each mistake delays the licence or creates an enforcement risk once the issuer is operational. The first mistake is treating the federal issuer application as equivalent to a state money-transmitter licence application; the federal regulator expects a bank-quality submission, with detailed financial projections, a comprehensive risk-management manual, board resolutions documenting the oversight framework, and legal opinions on the segregation and enforceability of the reserve-custody arrangements. An application that would satisfy a state regulator will be deemed incomplete by the OCC or the Federal Reserve, and the applicant will be asked to withdraw and resubmit after addressing the deficiencies. The second mistake is underestimating the lead time required to establish the banking relationships necessary to hold the reserves; a crypto-native issuer without an existing relationship with a US-domiciled bank willing to custody stablecoin reserves will face a search process that can take six months or longer, and the custodian relationship must be in place and documented before the regulator will approve the licence.
The third mistake is launching on-chain issuance before the compliance infrastructure is fully operational. A common pattern we observe is an issuer that obtains the licence, begins issuing tokens, and scales transaction volume rapidly, only to discover that its AML monitoring platform cannot keep pace with the on-chain data, its customer-verification process creates bottlenecks at redemption, or its reserve-reconciliation process relies on manual inputs that break when volume spikes. The regulator's expectation is that the issuer's systems and controls are tested and proven before the issuer scales; a failure to maintain accurate supply-to-reserve reconciliation or to file SARs on a timely basis during a growth phase will draw an enforcement action, not a grace period. The fourth mistake is failing to anticipate the cross-border compliance overlay when the issuer's tokens circulate on exchanges or through wallets domiciled in foreign jurisdictions. The issuer remains responsible for the BSA/AML compliance of the issuance and redemption transactions it conducts directly, but the issuer must also conduct due diligence on the intermediaries and obtain contractual commitments that the intermediaries will apply equivalent AML and sanctions-screening standards to the end users to whom they distribute the tokens.
A final operational mistake is treating the quarterly attestation and audit requirement as a ministerial task delegated to the finance function. The attestation is the primary public transparency mechanism and the regulator's principal verification tool; a material discrepancy between the attested reserves and the on-chain supply, or a qualified opinion from the auditor, will trigger an immediate examination and will damage the issuer's credibility with both the regulator and the market. The issuer must invest in real-time reconciliation infrastructure that produces an auditable trail of every issuance, burn, and reserve-custody movement, and the issuer must engage an auditor with experience in digital-asset attestation who understands the technical and legal nuances of reserve segregation under the Act.
Cross-border interaction with licensing and banking in other jurisdictions
A US-domiciled payment-stablecoin issuer operating under the federal regime will routinely confront questions of how the US licence and the US reserve framework interact with the licensing and banking regimes in other jurisdictions where the issuer's tokens circulate or where the issuer's users sit. The Act does not grant the federal issuer a passport that automatically permits the issuer to offer redemption services or to hold reserves in foreign jurisdictions, and the issuer must comply with the local payment-services, e-money, or VASP regulations in each jurisdiction where it conducts business. In the European Union, a US issuer seeking to offer redemption services to EU residents would need to assess whether the tokens constitute e-money tokens (EMT) under the Markets in Crypto-Assets Regulation (MiCA) and, if so, whether the issuer must obtain an EMT issuer authorisation from a member-state competent authority or whether the issuer can rely on an exemption or a third-country equivalence determination. In the United Kingdom, the issuer would need to evaluate the Financial Conduct Authority's (FCA) financial-promotion rules and the potential application of the Payment Services Regulations to the redemption process.
In practice, a cross-border stablecoin issuer manages this complexity by limiting direct issuance and redemption to US persons and US-domiciled entities, and partnering with licensed local intermediaries in other jurisdictions to handle customer-facing distribution and redemption. The intermediaries obtain the local licences (e-money institution, payment institution, VASP registration) and conduct the local customer due diligence and transaction monitoring, while the US issuer maintains the federal licence and the reserve custody in the United States. This model preserves the US issuer's regulatory clarity and limits its exposure to conflicting local requirements, but it requires the issuer to conduct rigorous due diligence on the intermediaries, to obtain contractual commitments on AML and sanctions compliance, and to negotiate liability allocation for intermediary failures. The issuer's legal and compliance function must monitor regulatory developments in the jurisdictions where its tokens circulate and must be prepared to exit a market or terminate an intermediary relationship if the local regulatory environment changes in a manner that creates unacceptable risk.
The banking interaction is equally complex: a US issuer holding reserves at a US bank may find that the bank's correspondent relationships in other jurisdictions impose additional due diligence or transactional restrictions on the issuer's redemption flows. If the issuer redeems tokens for a foreign holder and settles the fiat leg through a correspondent bank in the holder's jurisdiction, the correspondent's AML and sanctions screening may delay the settlement or may flag the transaction for additional review, creating a redemption timeline that exceeds the "reasonable period" standard under the Act. The issuer must design its redemption infrastructure to account for these frictions and must communicate realistic settlement timelines to holders in different jurisdictions. The alternative is to maintain direct banking relationships in each major market, but that approach multiplies the regulatory burden and the custodian-risk exposure and is typically viable only for issuers at significant scale.
A common assumption is that the licence itself opens banking access
A widespread misconception among stablecoin issuers is that obtaining a federal payment-stablecoin issuer licence will automatically resolve the banking-access problem that has historically constrained crypto businesses in the United States. The assumption is that a federally supervised issuer will be viewed by banks as a low-risk counterparty, and that the banks will compete to custody the issuer's reserves and to provide the issuer with operating accounts for its corporate treasury. In practice, the licensing regime and the banking-access question are distinct, and the licence does not compel any bank to accept the issuer as a customer. Banks evaluate crypto-related accounts through a risk-management lens that considers reputational risk, operational risk, and the perceived volatility of regulatory expectations, and many banks remain cautious about onboarding stablecoin issuers even when the issuer holds a federal licence and is subject to ongoing federal supervision.
The banks that do custody stablecoin reserves typically impose account conditions that go beyond the statutory requirements: higher due-diligence standards at account opening, transaction-monitoring obligations that require the issuer to provide on-chain data feeds, periodic attestations from the issuer's auditor, and the right to terminate the relationship on short notice if the bank's risk appetite changes. An issuer that assumes it can establish reserve custody at a single large bank and move on to operational matters will often discover, several months into the relationship, that the bank has flagged a transaction pattern or a customer profile that the bank considers high-risk, and the bank asks the issuer to terminate certain customer relationships or face account closure. The issuer must then scramble to find an alternative custodian, and if the issuer's reserve is concentrated at a single institution, a custody disruption can force the issuer to suspend redemptions while it migrates the reserve – an event that will draw immediate regulatory scrutiny and market alarm.
The practical implication is that banking access must be secured before the issuer commits to a launch timeline, and the issuer should maintain relationships with multiple custodian banks to distribute the custody risk and to preserve operational continuity if one bank exits the relationship. The issuer's business plan submitted with the federal licence application should identify the primary and backup custodians by name and should attach signed custody agreements or letters of intent; a plan that relies on "to be determined" or "banks to be identified" will not satisfy the regulator. For a crypto-native team without existing banking relationships, the search for willing custodians is often the longest and most unpredictable phase of the licensing process, and it is the phase where independent legal counsel with established banking contacts can materially accelerate the timeline and reduce the risk of a false start.
Related at OBOLUS
Related at OBOLUS
- Banking, Payments & EMI Onboarding for Digital-Asset Businesses – The full practice overview: account onboarding for exchanges, issuers and funds; EMI and payment-institution licensing across flagship hubs; bank-issued stablecoin structures.
- Bank-Issued Stablecoins: Subsidiary and Charter Structuring – For banks evaluating a direct stablecoin issuance: the charter route, the subsidiary structure, and the regulatory approval path.
- Payment Institution Licensing in Guernsey – A cross-border alternative: Guernsey's payment-institution regime for issuers seeking a Channel Islands base with UK market access.
FAQ
Can a crypto firm access banking under this regime?
The federal payment-stablecoin issuer licence does not guarantee banking access. Banks evaluate stablecoin issuers on a risk basis and may impose account conditions or decline the relationship. A licence demonstrates regulatory compliance but does not compel any bank to provide custody or operating accounts. Issuers should secure signed custody agreements with willing institutions before committing to a launch timeline. In practice, multiple custodian relationships are necessary to distribute risk and to preserve continuity if one bank exits. Counsel with established banking contacts can materially accelerate the search and reduce the risk of a false start at the custody stage.
What safeguarding applies to client funds?
Reserves backing payment stablecoins must be held in segregated accounts at insured depository institutions or in eligible short-term US Treasury instruments, and are deemed held in trust for the benefit of token holders. The reserves are excluded from the issuer's bankruptcy estate and are distributed to holders on a pro-rata basis ahead of general unsecured creditors if the issuer becomes insolvent. Legal segregation requires custodian acknowledgment that the reserves are not issuer property, and the custody agreements must eliminate setoff rights. Quarterly independent attestations verify that the one-to-one peg is maintained. If reserves fall short due to asset default or error, holders bear the shortfall pro-rata with no deposit-insurance backstop.
Which payment licence is required?
A payment-stablecoin issuer must obtain a federal licence from the OCC, the Federal Reserve, or a state regulator acting with federal coordination, or be a federally chartered depository institution. State money-transmitter licences alone do not confer the authority to issue payment stablecoins under the proposed federal framework. The federal issuer licence imposes bank-equivalent capital, governance, reserve-composition and BSA/AML requirements, and subjects the issuer to ongoing federal supervision and periodic examinations. Nonbank applicants must demonstrate organizational capacity and technology infrastructure comparable to a midsized bank before the regulator will approve the licence. Cross-border issuers may need additional local licences in each jurisdiction where they directly offer redemption services to local users.
About OBOLUS
OBOLUS is an independent digital-asset law boutique acting only for businesses. We advise exchanges, custodians, token issuers and funds on licensing across 70+ jurisdictions, on disputes and on-chain asset recovery across 25+ forums, and on the tax, banking and compliance that sit around them. Digital assets are the entirety of our practice. We assess token classification and licensing requirements against the substance of rights conferred, not the marketing label on a whitepaper, and we map the cross-border legal stack – entity, licence, banking, tax – before you commit capital to a structure. To discuss your situation, contact info@oboluslaw.com.
By Victor Olsen, Regulatory & Compliance Analyst – specializing in US federal and state digital-asset licensing frameworks, stablecoin reserve requirements, and BSA/AML program design for payment-token issuers.
This publication is general information about the law and does not constitute legal advice. It is not a substitute for advice tailored to your circumstances. OBOLUS accepts no liability for action taken or not taken on the basis of this material. For advice on your situation, contact info@oboluslaw.com.